Trilite® RMS Board is manufactured from a mixture of natural occurring mineral ores with high purity and highest quality reinforce with multiple layers of platinum strength glassfiberglass mesh. A Fireproof, Non-combustible, Category A board. It can be use for a wide range of applications both internal and external. It can achieve as high as 4 hours fire rating given the correct installation. RMS Board have very limited moisture absorption from air humidity, compared to normal MgO boards, the board does not contain any chloride ion (salt), resulting in corrosion of screws – nails – windows etc. The board can absorb and release moisture an unlimited number of times, without changes in the original board’s strength properties. The board is vapour permeable and insulation can be mounted directly on the backside, when used in ventilated constructions with closed vapour barrier.
- Fireproof , Green Construction
- Silica free and Chloride ion free
- Will not rot or decay in humid environment
- Resistant to termites, mold, fungus, mildew and insects
Application Areas of RMS Board
- In combination with insulation materials such as EPS, XPS, Polyurethane foam, Rockwool, Glasswool, Fiberglass for superior sound, heat and fire insulation of partition walls and sandwich panels. Ideal for pre- fabricated light steel buildings and constructions.
- For areas where you need the best water and moisture protection.
- For furniture and decoration manufacturing (fireproof doors, counters, cabinets, safe deposits boxes, etc…)
- For all interiors and exterior kinds of facings, linings, ceilings, raised flooring, underlayment, render backing among all others.
- For all applications needing the best heat, fire, termite, mold, mildew protection.
Easy to Finish
RMS Board smooth side is ready to take all kinds of wall finishing such as paint, textures, stucco, render coatings, wallpapers. Rough back side is ideal for wall adhesives to stick with tiles, granites, and other lamination materials.
Safe to Use
RMS Board is an inert product qualifies for use in hyper-allergenic and clean room applications. It is non-toxic, free from any kinds of materials hazardous to human health or to the environment. It has been certified as class M1 safe product in Finland.
Easy Installation
RMS Board is engineered for strength, can be use for all forms of construction from wooden frame, metal frame and SIP panel assemblies. Easily cut with circular or reciprocating saws. It can be installed using nails, screws or staples.
Dimension
Thickness |
3mm upto 20mm |
Standard Width |
1000mm / 1200mm / 1220mm |
Standard Length |
2440mm / 2700mm / 3000mm |
Key Benefits
- Excellent dimensional stability
- Excellent bond strength
- Severe duty rated for impact
- Euroclass A1 rated for reaction to fire
- Easy to handle and cut on site.
- Vapour permeable
- Weather resistant – will not delaminate or bow
- High pull-out strength – screw fix or nail
- Mould and mildew resistant
- Verified low embodied carbon
- 100% non hazardous material
- Superb moisture, fire and thermal resistant board.
Physical & Mechanical Properties
Test Properties |
Test Standard |
Test Result |
Unit |
Bending Strength |
BS EN 310 |
12.1 ~ 17.1 |
N / mm2 |
Compressive Strength |
BS EN 12390-3 |
8.3 |
N / mm2 |
Modulus of Elasticity |
BS EN 310 |
5210 ~ 7845 |
N / mm2 |
Impact resistance |
BS 5669 : Part 1 |
23 |
mm / mm |
Screw Withdrawal strength |
BS EN 320 |
69 ~ 87 |
N / mm2 |
Racking Strength |
EN 14358 |
9mm = 7.52 12mm = 8.41 |
kN (on 0kN load per stud) |
Racking Strength |
EN 14358 |
9mm = 12.09 12mm = 16.98 |
kN (on 5kN load per stud) |
Thermal Conductivity |
EN 12664 |
0.21 |
W/mK |
Water & Moisture Resistance Properties
Test Properties |
Test Standard |
Test Result |
Unit |
Water Vapour Transmission |
BS EN ISO 12572 |
48.1 |
g / m2 . Day |
Swelling in Thickness after immersion in water |
BS EN 317 |
0.2 |
% |
Cyclic Test in Humid Condition |
BS EN 321 |
-0.1% |
Ave. thickness swelling to 3 cycles of immersion in water for 72 hrs, freezing at -12°C to 20°C for 24
hrs, Drying at 70°C for 72 hrs. |
Movement from dry to saturated state |
CNS 13778 |
0.3 |
% |
Moisture Absorption Rate |
CNS 13778 |
35 |
% |
Length expansion after water absorption |
CNS 13778 |
0.06 |
% |
Porosity |
GB/T 7019-2014 |
33.4 |
% |
TRILITE® RMS Board was tested by renowned Swedish SP laboratory for its hygroscopic moisture movement in comparision with 2 other MgO boards in 12mm thickness. The boards were conditioned in a climate chamber with a temperature of 20°C and 95% RH ( relative humidity). Visual finding results : After 42 days, no water was release or seen for the TRILITE RMS boards, while reference MgO sample#1 from factory A , started releasing water after 12 days, and MgO sample#2 from factory B started releasing water after 2 days.
Durability
Test Properties |
Test Standard |
Test Result |
Unit |
Water Impermeability |
EN 12467 |
Category A |
No signs of water penetration after 24 hours, NO dampness or dripping on the undersides of the board. |
Heat Rain Incorporating Thermal Shock from water spray (50 cycles) |
EN 12467 |
Category A |
No bowing, warping, cracking, or delamination occurred. No deterioration in their water impermeability performance after the test showing neither traces of moisuture nor water drop formation |
Freeze-Thaw (100 cycles) |
EN 12467 |
Category A , post Freeze- Thaw MOR = 12.9 MpA |
There was no visual damage noted on completion of the 100 cycles |
Soak / Dry (50 cycles) |
EN 12467 |
Category A, post soak/dry MOR = 13.5 MpA |
There was no visual damage noted on completion of the 50 cycles |
Bending Strength after 24 hours soak in water |
EN 12467 |
Category A, MOR = 15.3 MpA |
Classified as a Class 4, Category A board |
TRILITE® RMS Board fulfill the requirements of the highest durability category “A” according to EN 12467 and may be subjected to heat, high moisture and sever frost.
100% Safe, Non-Toxic and Non-Harmful to Human Health
Test Properties |
Test Standard |
Test Result |
Unit |
Fungi Resistance |
ASTM C-1338 |
Fungal Resistant – No growth |
Biosan Lab – USA |
Alkalinity |
BS 6829 |
Sodium Oxide : 56.7% ( ph between 9.5 – 10 ) |
TUV Sud – Singapore |
Asbestos Content |
NIOSH 9002 |
No Asbestos Content |
TUV Sud – Singapore |
Sulphide S2 content |
BS EN 196-2 |
No Sulphide S2 Content |
TUV Sud – Singapore |
Formaldehyde Content |
ISO 14184-1 |
No Formaldehyde Content |
TUV Sud – Singapore |
Evaluation of Toxic Fumes generated during burning |
BS 6853 |
100% Non-toxic below the IDLH value of listed gases, summation index R, is less than 0.3 |
TUV Sud – Singapore |
Fire Rating and Fire Resistance Performance
Test Properties |
Test Standard |
Test Result |
Unit |
European Fire & Building Classification Standard |
EN 13501-1 |
A1 or A1fl |
A1 = Europe’s highest fire classification, BRE tested |
Surface Burning Characteristic to USA Standard |
ASTM E-84 |
Class “A” |
NGC – USA tested |
Flame Spread |
ASTM E-84 |
0 |
NGC – USA tested |
Smoke Developed |
ASTM E-84 |
0 |
NGC – USA tested |
Fire Rating – 9mm thickness boards |
BS 476 Part 22 |
71 minutes |
Exova Warrington – UK |
Fire Rating – 12mm thickness with steel & timber support |
BS 476 Part 20 |
132 minutes (Steel) 123 minutes (Timber) |
CERAM – UK |
Fire Rating – 12mm Single Specimen |
BS 476 Part 20 |
180 minutes |
CERAM – UK |
Combustibility |
EN 1182 and BS 476 Part 4 |
Non-combustible |
Warrington Tested |
Bomb Calorimeter Test (Gross heat of combustion) |
BS EN ISO 1716 |
Below 0.606 MJ/kg |
BRE- UK Tested |
Surface Spread of Flame |
BS 476 Part 7 |
Class 1 |
Warrington Tested |
Sound Insulation Performance
Test Properties |
Test Standard |
Test Result |
Unit |
12mm TRILITE® RMS partition wall |
BS EN ISO 717-1 |
Rw = 48 |
dB |
12mm TRILITE® RMS partition wall |
BS EN ISO 717-1 |
Rw = 45 |
dB |
Dimensional Tolerances
Test Properties |
Test Standard |
Test Result |
Density |
Kg / m3 |
1080 (± 150) |
Length & Width |
mm |
– 2mm, + 3mm |
Straightness of Edges |
mm |
< 2mm |
Squareness of the boards |
mm |
< 5mm |
CE Marking Conformity Number : 14SH200005029 according to European Construction Products Regulation (No. 305/2011).