Trilite RMS Board
Handling & Storage
Boards must never be carried in its horizontal position.
Boards should be carried on its long edges
( vertically) at all times. 
Boards must never be stacked on its edge or upright position.
Boards should be stacked & handled carefully to avoid damage. 
Boards must never be piled up with greater than 400mm spaced support battens
Other Handling Instructions
- Boards should be slided sideways when lifted from pallets.
- Boards are supplied in packs on wooden pallets to permit safe handling by forklift trucks.
- Boards must be allowed to dry ( when becomes wet) prior to fixing, installing or painting.
- Care should be taken to avoid damage to the ends, edges and surfaces.
- If outside, a protective plastic sheet must protect the sheets from getting rain and the elements.
- Boards must never be piled up more than 3 pallets on top of each other.
