| 
| 
Now, a new generation of
flooring available as PLAIN or Factory Finish patterns
suitable as underlayment for fast build flooring,
Cost-effective and
time saving plus all the advantages and convenience
you can expect...
|
|
 |
 |
 |
 |
 |
| TFP-101 |
TFP-102 |
TFP-103 |
TFP-104 |
 |
 |
 |
 |
| TFP-105 |
TFP-106 |
TFP-107 |
TFP-108 |
TRILITE RMS Boards as flooring substrate may be fixed to
timber or steel joists. The type, size and final spacings
of the joists should be determined by the structural engineers.
The thickness of the timber joists or width of the steel
joists should be sufficient ( 45mm minimum) to allow correct
fixing of the board .
The boards are fixed so the lengthwise direction is spanning
across the joists. Where load requirements are greater,
where wheel loads are involved or for general commercial
applications, THEN all board edges must be supported as
in Fig . 2 . Use screws with countersunk head ( ideal to
use stainless steel screw. It is recommended to apply a
layer of adhesive between the board edges.
Plain Underlining Boards
Thickness : 15mm , 18mm, 20mm
Dimension : 915mm x 1830mm ; 1220mm x 2440mm
“TFP” Series
Surface Boards :
Thickness and dimensions to be custom made according to
Customers request and particular application area.
|
)
)
)
)