 INSU-lite insulation board is a thermal and acoustical insulation product made
from bonding TRILITE RMS board on both sides with extruded polystyrene foam known as XPS for the superior sandwich core material.
XPS is one of the best types of plastic foam for specialized application known for its excellent resistance to moisture, imperviousness to rot, mildew and corrosion, controlled compressive strength and ability to maintain insulating
power. The closed cell structure and lack of voids in XPS helps the foam to resist moisture penetration , in fact when it comes to resisting water moisture absorption, there is not another insulation product that can perform better. |
INSULITE provides continuous thermal barrier, minimizing the heat flow through your walls, ceilings or floor (if installed correctly). The result is a more comfortable atmosphere with reduced cooling and heating costs.
INSULITE reduces the amount of energy required to maintain
comfortable living environments (i.e , gas, oil and electric ).
Thus, energy loss in buildings is greatly reduced and has a
profound effect on reducing consumption of our natural resources.
INSULITE is very easy to handle and fabricate. Fast, easy installation lowers labor costs.
Excellent acoustical properties effectively reduces noise.
Suitable for New & Refurbishment Internal & ExternalApplications
|
44% of your total utility bill pays for heating
and cooling your home? In fact, the Department
of Energy recommends that by insulating
adequately, an investment of just a few
hundred dollars can reduce heating and
cooling needs by about 30%.
Said another way, you can put your utility dollars
back in your pocket year after year by enduring
that your home's insulating system is as good as
it can be.
Long term performance of an insulation relies on the material's ability to resist moisture intrusion.
INSU-LITE Insulation board
Tough & Resilient
Low Thermal Conductivity
Fire Resistant
Resist Moisture& Mold growth
Eco-friendly
Thermal Resistance:
(R value) |
R = 0.721 m2. K/W |
Interior Walls Thermal
Conductivity Value : |
K = 1.0 6 W/ (m 2 . K) |
External Walls Thermal
Conductivity Value : |
K = 1.1 5 W/ (m 2 .K ) |
| Tensile Strength : |
Dry State = 0.21 Mpa |
| Saturated State |
0.11 Mpa |
| Shrinkage Rate : |
0.33% |
| Pull Strength : |
0.22 Mpa |
| Press Yield Strength : |
1.53 Mpa |
| Water Resistance Strength : |
1.43 Mpa |
Weather Resistance Strength :
(Tested at 100 C for 7 days) |
1.29 Mpa |
| Freeze Thaw Strength : |
1.46 Mpa |
|
